Main performance characteristics

1. Man machine interface control and operation control are convenient;

2. The number of turns and pulse setting; (each pulse is 72 degrees)

3. Screw slow start and deceleration stop;

4. Left and right rotation setting;

5. It can be set from top to bottom or from bottom to top;

6. Reset direction setting;

7. Output count

8. Motor starting delay setting;

9. Cylinder delay reset setting;

10. The bending speed can be adjusted by frequency conversion;

Main technical parameters

1. Power supply: single phase 220 V / 50 Hz, 1.5 kW

2. Gas source: 0.5 ～ 0.7MPa

3. Maximum diameter of die: 300 mm

4. Minimum forming diameter: 20

5. Maximum diameter of formed pipe: 8mm

6. Screw height: 50mm

7. Overall dimension: 1050 × 600 × 1420 mm

8. Weight: 240kg