Main performance characteristics

1. In the middle part, the duct is used to close the powder, with stable structure and controllable powder depth at the nozzle;

2. Dust free production is basically realized by closing the powder through the outer pipe and nozzle;

4. The filled electric heating tube has high powder density, low bad pressure resistance rate and good stability;

5. TEach branch can be closed separately， so the length of each branch pipe does not need to be the same,

  It is especially suitable for the situation of small quantity and many kinds of industrial pipe industry,
 which reduces the trouble of adjusting tooling when making different length pipes

Main technical parameters

1. Power supply: single phase 220 V / 50 Hz, 2.5 kW

2. Gas source: 0.5 ～ 0.7MPa

3. Pipe diameter: 8-20 (customized)

4. Processing length: (to be customized)

5. Quantity of each processing (number of jobs): (determined by pipe diameter, customized according to demand)

6. Rising speed of powder filling: 300 ~ 350mm / min (variable frequency adjustable)

7. Filling density: ≥ 2.25/cm3

8. Mandrel driving mode (wire drawing up): variable frequency motor

9. Conduit driving mode (conduit rising and falling): variable frequency motor

10. Medium protection mode: three tubes (nozzle powder control)

11. Control mode: man machine interface