Main performance characteristics

1. Man machine interface control and operation control are convenient;

2. There are many ways to control the descent of the catheter: length, time and positioning sensor, with accurate descent position;

3. Two program choices: the lower part can be clamped or not clamped;

4. The dropping time can be controlled to reduce the waste of magnesium powder;

5. The ejector can be selected to prevent the ejector from bending;

6. The following function can be controlled. The following function can be turned off and used as a fixed oscillation (this function is only for random following)

7. Equipment workflow monitoring;

8. Equipment fault prompt;

9. Data monitoring of main action time of equipment;

10. PLC I / o point monitoring;

Main technical parameters

1. Power supply:

No follow type: single phase 220 V / 50 Hz, 1.5 kW

Follow type: single phase 220 V / 50 Hz, 2.0 kw

2. Gas source: 0.5 ～ 0.7MPa

3. Processing pipe diameter: φ 6 ~ φ 20 (customized)

4. Processing length: (the following are common models and customized for other models)

5. Quantity of each processing (number of jobs): 12-24 pieces (determined by pipe diameter, customized according to demand)

6. Rising speed of powder filling: 300 ~ 350mm / min (variable frequency adjustable)

7. Filling density: ≥ 2.25/cm3

8. Mandrel drive mode (wire drawing up): cylinder drive

9. Conduit driving mode (conduit rising and falling): variable frequency motor

10. Protection mode: single catheter

11. Control mode: man machine interface

12. Production efficiency: about 8000 / 8 hours (calculated by 24 stations and 300 mm)