Main performance characteristics

1. Adopt the structure of "Three Guarantees" to reduce dust and make it more environmentally friendly;

2. Convenient man-machine interface control and operation control;

3. There are many ways of catheter lowering control: length, time and positioning sensor, and the lowering position   is accurate;

4. Manual loading and unloading of pneumatic clamp in a whole row;

5. The powder dropping time can be controlled to reduce the waste of magnesium powder;

6. The guide rod can be ejected optionally to prevent the guide rod from bending;

7. The lower part is fixed by numerical control adjustment, which is convenient and labor-saving;

8. The conduit chain is distributed on both sides, the tension is uniform, and the sliding seat bearing is more     durable;

9. Equipment workflow monitoring;

10. Equipment fault prompt;

11. Data monitoring such as main time of each action of the equipment;

12. PLC I / o point monitoring;

Main technical parameters

1. Power supply: Phase 220V / 50Hz, 2.5kW

2. Air source: 0.5 ~ 0.7MPa

3. Diameter of processed pipe: φ 8～ φ 20 (customized)

4. Quantity of each processing (number of work): 12 ~ 24 pieces (determined by pipe diameter and can be customized   according to demand)

5. Rising speed of powder filling: 300 ~ 350mm / min (frequency conversion adjustable)

6. Oscillation mode:

             Electromagnetic or motor oscillation (optional)

             Follow the rise and fall, which can be controlled and fixed

7. Powder filling density: ≥ 2.25/cm3

8. Mandrel driving mode (wire drawing rising): driven by variable frequency motor

9. Conduit driving mode (conduit rising and falling): variable frequency motor

10. Middle protection mode: three conduits (middle protection)

11. Control mode: man machine interface

12. Production efficiency: about 3500 / 8 hours (according to 24 station 800mm)