Main performance characteristics

1. Man machine interface control and operation control are convenient;

2. There are many ways to control the descending of catheter: length, time and descending position;

3. Two program choices: the lower part can be clamped or not clamped;

4. The dropping time can be controlled to reduce the waste of magnesium powder;

5. When filling powder, the pipe rises slowly to prevent the nozzle from leaving before the magnesium powder reaches the bottom of the pipe;

6. The ejector can be selected to prevent the ejector from bending;

7. The following function can be controlled, and the following function can be turned off to be used as a fixed oscillation;

8. Equipment workflow monitoring;

9. Equipment fault prompt;

10. Data monitoring of main time of each action of equipment;

11. PLC I / o point monitoring;

Main technical parameters

1. Power supply: single phase 220 V / 50 Hz, 2.5 kW

2. Gas source: 0.5 ～ 0.7MPa

3. Pipe diameter: 8-20 (customized)

4. Quantity of each processing (number of jobs): 12-24 pieces (determined by pipe diameter, customized according to demand)

5. Rising speed of powder filling: 300 ~ 350mm / min (variable frequency adjustable)

6. Oscillation mode:

Electromagnetic or motor oscillation (optional)

Following up and down, it can be controlled and fixed

7. Filling density: ≥ 2.25/cm3

8. Mandrel drive mode (wire drawing up): frequency conversion motor drive

9. Conduit driving mode (conduit rising and falling): variable frequency motor

10. Insurance mode:

Single pipe (four wing nozzle, single protection)

Double pipe (spiral nozzle, double protection)

11. Control mode: man machine interface

12. Production efficiency: about 3500 / 8 hours (according to 24 stations 800m)